Welcome to our review of the Bostitch N80CB Framing Nail Gun. We’ll get into the pros, cons and specifications of this nailer a bit further down the article. But first, let’s go through who Bostitch actually are in the first place, and why you might want to consider purchasing one of their nailers.
BOSTITCH N80CB-1 Framing Nailer – Introduction
Choosing a right nailer has been a tough task for millworkers these days.
In early days, with availability of only a two or three brands the choice was a tad easy but with the recent trend of DIY the nailer market has been on a boost.
Various brands are being introduced with some being the faux copies of the original ones. The price is another factor as not everyone can afford high end nailer.
So, people also tend to give a chance to the cheaper ones but then the finishing is compromised. Selecting a right nailer is indeed tedious.
However, we are making it a bit easy for you with this review of a product from the BOSTITCH.
BOSTITCH is a trusted nailer brand and has introduced many high end nailers which work well with variety of projects.
The nailers are sturdy and specially designed to meet your requirements. It has a good reputation among the contractors because of its reliable features.
But despite of all its positive reviews this is not the nailer to be handed over to a beginner because this is a professional nailer.
You will have to gain some knowledge about the woodworking and nailers to lay your hand on this beauty. The nailer is on the heavier side and suitable for use by the professionals.
Beginners can take a while to adapt with the load but this is one of the bests you can get from the BOSTITCH.
You can entirely rely on its capability and the outcome for BOSTITCH only serves you with high end nailers.
BOSTITCH N80CB-1 Review
Easy To Use
A complicated nailer turns even the work convoluted. A lot of time is wasted on simply getting to know the machine.
However, knowing your machine is utmost before trusting on it with your work but the work becomes easier if the machine has easy features and is not unnecessarily complicated.
The complications are generally introduced to play with people’s mind because most of the people believe that only a machine with too many features can work well. However, so is not the case with N80CB-1.
The machine is indeed not exaggerated with unnecessary features. It is kept simple and easy to handle and use. Both beginners and professionals will find it worth a shot.
What is the use of a nailer anyway if it is not powerful enough?
The nailer is heavy and offer you with enormous power to complete varied projects like framing, seathing, subflooring, roof decking, siding and fencing.
It is a strong nailer and can drive a nail into almost anything. The weight would not be an issue once you are used to it.
The magazine capacity of the device also renders it powerful.
It can hold a lot of nails in one go and so you do not have to worry about changing the nails from time to time. It saves a lot of your time.
The device is highly durable. It is manufactured in Taiwan and features an aluminum housing.
The aluminum makes the device sturdy and corrosion free. It is also equipped with a composite canister to protect the components from all kinds of impact.
It can easily withstand bumps and falls, so you no longer have to worry about the malfunctions in the event of an accident.
The quick loading canister allows you to reload new coils conveniently and easily. So, if you are one of those people who hate reloading nailers then this nailer would be the best choice for you.
The only drawback associated with this device is the type of nails that it uses.
The N80CB-1 shoots only one and a half to three and one fourth inch, fifteen degrees, wire weld collated full head nails.
These category of nails are certainly useful but they are not always easy to find. So, check the availability of the nails around you if you wish to purchase the product.
- Good reliability.
- Easy to use and load.
- Useful for varied repetitive projects.
- Large capacity magazine.
- May be incompatible with other types of nails.
- Not easy to use for beginners.
- Beginners might find it heavy.
- Availability of nails might be an issue.
About The Author: Hi There! I’m Dave. I’m a certified millworker and carpenter, and have been working in the industry for over 10 years. I created this website to pass on my knowledge so that other enthusiasts, no matter what their skill level, can enjoy the craft as much as I do. I hope you enjoy!