The DEWALT DCN692B 20V Max XR Brushless Dual Speed Nailer, the BOSTITCH F21PL Framing Nailer 
and the NuMax SFN64 Straight Finish Nailer not only have different features, they also seemed to be designed for different types of projects.
All three devices offer features and settings that are quite interesting, but each one also has its own special aspect. So if you’re interested in buying one or all of these nailers then here’s what you should know about them.
Features
All three nailers have their fair share of pros and cons as well as some specialized features. If you're interested in the DEWALT DCN692B 20V Max XR Brushless Dual Speed Nailer, it offers a good mix of durability and versatile design. As for the BOSTITCH F21PL Framing Nailer, the best thing about it is that it can be used for framing, sheathing and other similar projects. And with regards to the the NuMax SFN64 Straight Finish Nailer, it’s a great nailer for finishes, trims and special projects. So let's take a look at what each of these devices has to offer you.
First of all, we have the DEWALT DCN692B 20V Max XR Brushless Dual Speed Nailer, which features a brush-less motor and an engine design that allows it to drive three and half inch nails. Other useful features include an easy-to-access nosepiece for easy removal of jammed nails, a trigger lock off that allows users to easily disable the nailer, an impact resistant top cap, a stall release lever to help users reset the driver blade and a gas free operation mechanism for easy cleaning.
However, the most interesting aspect of the DCN692B 20V Max XR are its two speed settings. Speed Setting One is meant to drive nails between two to three inches, whereas Speed Setting Two is meant to drive 3 inch nails. Moreover, it’s also worth mentioning that Setting One operates at low vibration, has better shots per charge and higher application speeds, while Setting Two was designed for consistency and stability.
Next, we have the BOSTITCH F21PL Framing Nailer. This device offers a high capacity magazine that can hold around 60 nails, a 16 inch layout indicator and quick-change nosepieces to switch from one type of nail to another.
However, the most unique feature the F21P1 offers is its ability to set the nail depth with only a push of a button. For contractors who demand convenience from their nailers, this can be a very practical feature to have, particularly for intricate or difficult projects.
As for durability, the F21PL features a magnesium construct which increases its durability, while at the same time, reducing its total weight. In contrast to the external design, though, the internal components can be a little fragile, so be sure to exercise caution.
Finally, there is the NuMax SFN64 Straight Finish Nailer. This nailer was designed to drive 16 gauge straight finish nails, but it also offers adjustable depth settings to allow for different applications. A quick jam release is also present to easily clear jammed nails.
Other useful features include a finger depth adjustment, a no mar tip that protects sensitive surfaces from accidental damage, an anti-dust cap, a 360 adjustable exhaust that keeps exhaust away from the user’s face, and an aluminium cylinder and magazine for reduced weight.
Who Should Buy These Products?
First, we have the DEWALT DCN692B 20V Max XR Brushless Dual Speed Nailer. This device is quite versatile, and can be used for most residential projects. Not only does the nailer require minimal maintenance, it also works well in cold weather, where gas cartridges are prone to fail.
Despite its durability, however, it’s important to keep in mind that the DCN692B is not the most flexible nailer in the market, and it doesn’t have any specialized features. So this sort of device is best suited for people who prefer a mixture of durability and minimal maintenance. It's also most suited for people who usually perform residential type projects or projects that involve residential materials.
Up next is the Bostitch F21PL Round-Head Framing Nailer. This is the kind of device that is ideal for framing, sheathing, bracing and subflooring projects, but not much else. So although it is relatively easy to use, it is not meant for all kinds of projects.
Also, this nailer is noisy, and it can be difficult to control, but other than these relatively minor problems, it works well enough. It’s light and the controls are quite handy, especially when you consider the design of the F21PL itself.
Lastly, we have the NuMax SFN64 Straight Finish Nailer, which is the kind of nailer that’s designed for projects that involve furniture, cabinets, base boards, window casings and more. Additionally, it can also be used for interior and exteriors finish and trims, and the entire device is a pleasure to use.
The downside with the SFN64 is that it is not quite suitable for daily projects. Instead, it seems to be most suitable for certain situations or special projects that require a more specialized nailer. Also, even though it can be used to cast very large nails, it is somewhat heavy, so you probably shouldn’t buy this item if you’re not used to working with heavy nailers.
Conclusion
The F21PL and the SFN64 are the kind of nailers that were designed for specific types of projects. Where the F21PL is most suitable for framing and sheathing, the SFN64 is ideal for finishes, trims and unconventional projects.
In contrast to the other two, the DEWALT DCN692B is a versatile nailer with very durable features. It’s also the kind of device that is most suited for projects that take place in rough or difficult environments. The downside is that this nailer seems to be ill-suited for projects that require more specialized features.
Finally, it's worth mentioning that all three devices are neither too affordable nor too cheap, considering the value that they offer. So if you’re going to buy one of these nailers, pay attention to what they are designed to do. Although all three devices can be used for a wide variety of projects, their features make them more suite
| Preview | Jump To Review | Size | Weight | Rating | Warranty | Buy Now |
|---|---|---|---|---|---|---|
|
|
Paslode 905600 Cordless XP | 5" x 17" x 17" | 7.2 lbs. | 90 Warranty | ||
|
|
MAX SN883RH2 | 20.8" x 4.8" x 11.9" | 8.8 lbs. | 1 Year | ||
|
|
Bosch SN350-20F | 22.7" x 15.3" x 6" | 11.8 lbs. | 1 Year | ||
|
|
Makita AN923 | 22" x 4.2 "x 13.7" | 8.7 lbs. | 1 Year | ||
|
|
DEWALT DCN692B 20V | 15.2" x 5.9 "x 13.2" | 7.8 lbs. | 3 Years |
